Latest Knowledge Base Articles
VPN
This article explains setting up a LAN-to-LAN VPN between
two Vigor Routers with the same IP range. The main issue is two routes to the
same subnet, causing conflicts. If changing the subnet isn't possible,
translating the local IP to an unused range for the VPN is a workaround. It
also covers configuration steps for DrayOS 5 routers.
Click
here to read
the knowledge base article.
If your ISP provides only a
private IP, setting up a traditional VPN can be challenging. DrayTek’s VPN
Matcher solves this by acting as a digital coordinator, helping two routers
find each other and connect through NAT. Combining it with the WireGuard VPN
protocol (in DrayOS 5, v5.4.1+) ensures faster, more reliable connections in
complex networks. This article describes how to set up a VPN between two
Vigor2928 routers.
Click here to read
the knowledge base article.
New Feature
- Support VPN matcher V2
- Enhance the slow path performance
Click
here to download the firmware.
Vigor3910 V4.4.5.3
Improvements
System
Reboot
- Fixed: Router reboot caused by saving Syslog to
a USB disk and other unexpected reasons
VPN
- Fixed: Failure to establish the Teleworker VPN
IPsec IKEv2 PSK connection from iOS
- Fixed: VPN WireGuard 2FA pop-up did not show
when the firewall rules containing URL Filter/DNS Filter were active
For
a complete list of improvements, refer to the release notes in the download
link.
Click
here
to download the firmware.
Vigor3912 V4.4.5.3
Improvements
System Reboot
- Fixed: Router reboot caused by saving Syslog to a USB disk and other unexpected reasons
VPN
- Fixed: Failure to establish the Teleworker VPN IPsec IKEv2 PSK connection from iOS
- Fixed: VPN WireGuard 2FA pop-up did not show when the firewall rules containing URL Filter/DNS Filter were active
For a complete list of improvements, refer to the release notes in the download link.
For a complete list of improvements, refer to the release
notes in the download link.
Click
here
to download the firmware.
Improvements
· Improve the compatibility with APTEK DAC cables
· Fixed: Upgrade SDK Patch to improve the
stability of GPIO pin determination
· Fixed: A syslog format issue that prevented
Vigor ACS from collecting logs correctly
For
a complete list of improvements, refer to the release notes in the download
link.
Click
here
to download the firmware.
Improvements
· Improve the compatibility with APTEK DAC cables
· Fixed: Upgrade SDK Patch to improve the
stability of GPIO pin determination
· Fixed: A syslog format issue that prevented
Vigor ACS from collecting logs correctly
For
a complete list of improvements, refer to the release notes in the download
link.
Click
here
to download the firmware.
Improvements
· Improve the compatibility with APTEK DAC cables
· Fixed: Upgrade SDK Patch to improve the
stability of GPIO pin determination
· Fixed: A syslog format issue that prevented
Vigor ACS from collecting logs correctly
For
a complete list of improvements, refer to the release notes in the download
link.
Latest
Software
Improvements
· Support WireGuard VPN
· Display the VPN type in use after connecting via
EasyVPN (Auto Mode)
· Fixed: Failure to establish the SSL VPN, and
Smart VPN crashing unexpectedly
· Fixed: IP address changed unexpectedly while
establishing the VPN connection using IKEv2 EAP
Click
here
to download the software.
DrayTek HQ frequently sends
notifications about system updates, outages, security alerts, and firmware
releases.
Click here for the latest news from DrayTek HQ.
To subscribe to our regular news updates, click “Subscribe”
on this page or log into your i-helpdesk account and enable the “Subscribe”
option.