Upcoming Webinar

Free Webinar – Firewall in DrayTek Routers (Part 1)

Tuesday 6^st October 2020, 10:00am

Duration: 30 minutes

 

Tune in to the first part of our 2-part series of YouTube Premiere webinars: Firewall in DrayTek Routers (Part 1)

In this webinar we discuss firewall basics, followed by a look at DrayTek firewall facilities, and concluding with a deep dive in the firewall menu. Topics covered include:

1.       Firewall Basics
- Types of Firewalls
- Firewall Categories

2.       Draytek Firewall Facilities
- Stateful vs Stateless Firewall
- Default Data Filter - Block NetBios
- Default Call Filter and Data Filter

3.       DrayTek Router Firewall Menu

- Look at firewall configuration options

 

Click here or this link https://youtu.be/E_alcX5F1no

Then click on “SET REMINDER” to receive a reminder when this event is scheduled to start.

Latest Application Notes

Wireless

How to set up Wi-Fi Mesh Networks using Preferred Uplinks and Auto Reselect

This application note describes how you can configure the Wi-Fi Mesh network to use preferred uplinks to other Wireless Mesh Nodes. This will prevent a connection from being established with a node having a weaker Wi-Fi signal.

Click here to read the application note.

VPN

Port Redirection over VPN to a host on the remote network

This application note describes how to configure port redirection over a VPN tunnel to allow a remote dial-in VPN client to have access to server at the other end of a LAN to LAN VPN tunnel.

Click here to read the application note.

Apply NAT inside IPsec VPN to match Remote Network's Firewall Policy

This application note shows how to configure a LAN-to-LAN IPsec VPN tunnel to use NAT so that the remote network will only see traffic from a single IP address.

Click here to read the application note.

ACS

How to get notified on VigorACS when someone has changed the settings of the registered router

This application note shows how to configure the Vigor router TR-069 settings and VigorACS 2 so that the network administrator will be notified when someone has logged in the Web UI or made configuration changes on the router.  This feature is available on routers running the latest firmware.

Click here to read the application note.

 

Latest Software

Smart VPN Client (iOS) V1.7.2

Improvement

·         When your system is iOS13(or above), add a new option to launch system setting, you can change the preferred language here.

 

Click here to download the software.

 

Smart VPN Client (macOS) V1.4.0

Improvements

·         Support 'Connect on Demand' feature for IPsec XAuth/IKEv2 EAP type VPN

·         Provide SSL type VPN can store profile without password.

·         Provide SSL type VPN mOTP setup without PIN code.

·          Improve IKEv2 EAP type VPN use AES encryption algorithm.

 

Click here to download firmware.

 

To subscribe to our regular news updates, click on “Subscribe” on this page or login into your i-helpdesk account and enable the “Subscribe” option.