System Maintenance
Find the serial number of your Vigor router
The serial number of the router is usually required when making a warranty claim. This application note shows where to look to get the router serial number. Also, in the latest firmware release version 3.9.1 there is an added feature under the Service Status menu which displays the router serial number.
For more details click here to read the application note.
VPN
How to configure OpenVPN in Vigor Router using XCA certificate and key management
This article shows how to use XCA, a free Certificate Authority (CA) software, to generate and manage the server and client certificate that required for OpenVPN configuration.
Click here to read the application note.
NBN
Transitioning Phone Services to the NBN
This article covers the different connection methods to the NBN and looks at one of the common issues where phone services are locked into the ISP supplied router. Here we provide a method where the DrayTek router can be used for business functions while still utilising the ISP supplied router for VOIP services.
Click here to read this article.
WAN
Adding LTE Connection to a Broadband Router using VigorLTE 200 or Vigor2620L in LTE Bridged Mode
This article provides a solution utilising the Vigor2620L or VigorLTE200 running in bridge mode to provide LTE WAN connectivity to a broadband router located in a data centre or communications room where the LTE signal is very weak or non-existent.
Click here to read the article.
Improvements
·
Remove the weather radar channel (120, 124, and
128) from telnet commands.
· Fixed: Unable to make connection between Vigor router and VigorACS when both sides used HTTPS.
· Fixed: Route policy (with load balance) did not work.
Improvements
· Fixed: 3G WAN in PPP mode was disconnected frequently.
· Fixed: Could not use # as WLAN SSID.
· Fixed: Wireless 802.1x connections were blocked intermittently.
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
New Features
· Support IPTV diagnosis.
Improvements
· Adjust the setting method for P5/WAN2.
· Add the MyVigor Services>>Service Status page to display the service activation information.
· Add the Station Control field in Central Management>>AP>>WLAN Profile.
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
Improvement
· Allow checking VPN status via SNMP.
· Route policy (with load balance) did not work.
· Vigor router reboot after setting the telnet command "sys ver dbg".
Click here to download the firmware.
New Features
· Support IPTV diagnosis.
Improvements
· Adjust the setting method for P5/WAN2.
· Add the MyVigor Services>>Service Status page to display the service activation information.
· Add the Station Control field in Central Management>>AP>>WLAN Profile.
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
New Features
· Support IPTV diagnosis.
Improvement
· Add the MyVigor Services>>Service Status page to display the service activation information.
· Add the Station Control field in Central Management>>AP>>WLAN Profile.
· Add a check box to hide Group Password in Central Management >> Switch >> Profile page.
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
New Features
· Support IPTV diagnosis.
Improvement
· Add the MyVigor Services>>Service Status page to display the service activation information.
· Add the Station Control field in Central Management>>AP>>WLAN Profile.
· Support Exception list for load balance in WAN>>General Setup
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
Improvement
· Support SMTP port and SSL options on System Maintenance >> Syslog / Mail Alert setup.
· Failed to set correct Management VLAN ID on LAN >> General Setup.
Click here to download the firmware.
Improvement
· Add Device Object and integrate with WLAN access control & Schedule.
· Support VID (VLAN Tag) for wireless clients via mesh network.
· Support IEEE 802.11r.
· Support a speed-test between Mesh node & Mesh root via web.
· RADIUS server profile page corrupted when adding users.
Click here to download the firmware.
New Features
· Support new VPN type - OpenVPN (only supported in Windows 7 and above). To use OpenVPN, you MUST manually pre-install the OpenVPN Client in the PC.
Improvement
· Support the function of exporting / importing SmartVPN profile.
· Support the function of importing "ovpn" config file into SmartVPN client.
Click here to download the software.
Latest version of iOS app to easily setup and manage the Mesh Wireless networks.
Click here to download the app.
Latest version of the Smart VPN client for iOS devices.
Click here to download the app.
To subscribe to our regular news updates, click on “Subscribe” option at: http://eepurl.com/gwBeUj
For more information on i-Lan Technology Pty visit http://www.i-lan.com.au/support/terms-conditions or email support@i-lan.com.au if you have a specific question that
you would like addressed.