Weekly Update 27 February 2020

Weekly Update 27 February 2020

Latest Video

DrayTek Vigor3910 Octuple WANEnterprise Level Broadband Router

The Draytek Vigor3910 is a high-performance enterprise level broadband router featuring a powerful quad-core processor and a massive 15 interfaces, which can be configured to allow up to eight Internet connections at once!

With 8.5 Gbps NAT throughput, support for 150,000 NAT sessions and enterprise level features, the Vigor3910 router is an excellent solution for network applications in corporations, organisations, and governments.



Click here to watch the video.

 

Latest Application Notes

VigorAP 802 as a Wi-Fi Extenderbetween Two DrayTek Access Points

This application note shows how to configure the VigorAP 802 as a Wi-Fi extender to bridge two wireless networks. In the example shown, a Vigor2762aC is bridged to a VigorAP 903 through the VigorAP 802. The VigorAP 802 can also be used as an access point at the same time it is used as a Wi-Fi extender.

Click here to read the application note.

 

Latest Firmware

Vigor2133 V3.9.3

Improvements

·         Improve the ACME log message.

·         Improve the privacy of VPN matcher setting.

·         Add a drop-down menu of WAN alias IP on System Maintenance >> TR-069 Setting.

·         Add a new 3G connection recovery method for Huawei E3372s-153 dongle.

·         Support IPsec Xauth and IKEv2 EAP authentication made by RADIUS server / LDAP/AD server.

For a full list of improvements refer to the release notes in the download link.

Click here to download the firmware.

Vigor2952 / 2952P V3.9.2.1

Improvements

·         Fixed: The issue of VPN concurrent connection for remote dial-in users.

·         Fixed: The issue of NAT performance.

Click here to download the firmware.

Vigor3910 V3.9.1.3

Improvements

·         Make specific software adjustment for the newer version hardware GPY211 and GSW140.

·         Improvement for the WAN up / down mechanism by ignoring the erroneous port status update.

·         Make sure the acceleration mechanism is aware of interface status (i.e. flush related conntrack when an interface is down).

·         Fixed: The issue of auto reset to factory default if the configuration was corrupted.

·         Fixed: The issue that dial-in IPsec Aggressive VPN connection could not be up again after a reboot.

·         Fixed: The issue that SSL VPN LAN-LAN did not forward packets with MTU 1395~1400.

·         Fixed: The issue of MSS (maximum segment size) in SSL VPN.

Click here to download the firmware.

VigorAP 918R / VigorAP 920R V1.3.2

New Feature

Support WPA3.

Improvements

·         Support VID (VLAN Tag) for wireless clients via the mesh network.

·         Make slight changes to meet the simplified APM on the Vigor router.

·         Fixed: The issue of mesh node management by VigorACS server.

Click here to download the firmware.

VigorSwitch G1280 / VigorSwitch P1280 V2.6.0

New Features

·         Support IP Conflict Detection.

·         Support VLAN interface for ONVIF (ONVIF Surveillance>>Topology).

Improvement

·         Compatibile with VigorACS 2.

Click here to download the firmware.

Latest Software

VigorConnect V1.3.1

New Feature

·         Support the management for VigorAP (e.g., VigorAP 912C, Vigor AP 918R/RPD).

Click here to download the software

Smart VPN Client (Android) V1.1.1

Improvements

·         Improved stability of auto reconnection

·         Minor bug fixes

Click here to download the software.

 

To subscribe to our regular news updates, click on “Subscribe” option at: http://eepurl.com/gwBeUj


If you no longer wish to receive e-mails from us, please reply with "Unsubscribe".
For more information on i-Lan Technology Pty visit 
http://www.i-lan.com.au/support/terms-conditions or email support@i-lan.com.au if you have a specific question that you would like addressed.

 

 



    • Related Articles

    • Weekly Update 26 November 2020

      Latest Application Notes Security What should I do when Vigor Router isgetting the message “ARP Address Mismatch” in Syslog? This application note describes how to adjust router settings when you see the syslog message: “Arp address mismatch – Source ...
    • Weekly Update 4 May 2022

      Security Advisory OpenSSL vulnerability (CVE-2022-0778) Released Date: 2022-04-27 A Denial-Of-Service Vulnerability in OpenSSL (CVE-2022-0778) has been found recently. The BN_mod_sqrt() function in OpenSSL, which is used for parsing certificates ...
    • Weekly Update 4 February 2022

      Upcoming Webinar Free Webinar – 802.11ax Wi-Fi (Wi-Fi 6) and its Benefits Tuesday 15th February 2022, 12:00 noon AEST Duration: 30 minutes   Tune into our next YouTube Premiere webinar: 802.11ax Wi-Fi (Wi-Fi 6) and its Benefits. In this webinar we ...
    • Weekly Update 12 December 2019

      Latest Video DrayTekTransitioning Phone Services to the NBN Part 2 The previous video (Part 1) looked at replacing the ISP supplied router connecting to the NBN if it did not do everything required. This video continues and goes through the ...
    • Weekly Update 14 November 2019

      Latest Video DrayTek Products and Solutions For NBN There are 7 different types of internet services using different technologies grouped under one umbrella called the NBN Multi Technology MIX, or MTM. Each technology uses a different type of cable ...