VigorACS 2: Notice of Discontinuation

VigorACS 2, DrayTek’s popular network management software, will be discontinued at the end of 2023.

It is replaced by VigorACS 3, which has all the features of VigorACS 2 but with improvements in the frontend and backend. These include the web interface, and support for SD-WAN with:

1. Auto VPN (Hub-and-Spoke as well as Full Mesh)
   
2. Auto VoIP WAN
   
3. Traffic Control with SD-WAN Route Policy
   
4. Application Route Policy
   

An additional feature is Centralised Hotspot Portal.

If you are currently using VigorACS 2, it is recommended to upgrade to VigorACS 3 before the end of this year. Upgrading to VigorACS 3 is completely free of charge and the VigorACS 2 licence key is fully transferrable. For more information, check out the following Application Note: https://www.draytek.com/support/knowledge-base/7665

If you wish to upgrade to the latest released software, please contact us at support@draytek.com.au for download instructions.

For more information about VigorACS 3 and what it can do for you, check out our webpage at https://www.draytek.com.au/products/network-management-tools/vigoracs-3/ and our playlist of ACS 3 How To videos at https://www.youtube.com/playlist?list=PLi-Jo0k3UBbS30_bImVpCf2OfxZTmiWC_

 

 

VigorAP 906 can be Managed by VigorConnect

VigorAP 906 running firmware V1.4.6 or later, is now supported in the latest version of VigorConnect.

VigorConnect. is a centralized portal allowing you to efficiently control and monitor your LAN network devices offering features like pushing the same configuration or scheduling a firmware upgrade to the selected devices.

Requirements:

• AP 906 Firmware: V1.4.6 or later
  
• VigorConnect Software: V1.8.1 or later
  

 

 

 

Latest Firmware

VigorAP 912C V1.4.10

Improvements

1. Fixed: Accessing the AP's WUI via the Internet
2. Fixed: Keeping stable wireless connection between 5GHz and 2.4GHz frequencies
   

Click here to download firmware.

 

Latest Software

VigorACS 3 v3.4.0

New Features

1. Add the notification for new releases of VigorACS
2. Supports OTA(Over-The-Air) updates.
   
3. Support the storage limitation for Alarm, Logs, Device SysLog and File Manager.

Improvements

1.  Add the new option of WireGuard VPN.
   

1.       Support to manage new CPE (Vigor2763).

1.      Improvement on the Network management list.

1.       Improvement for the dashboard of the offline CPE

A complete list of improvements is available in the release notes at: https://www.draytek.com/products/vigoracs-3/

 

Support Model and Version

For the full model support list, please refer to Compatible Devices section in URL:

https://www.draytek.com/products/vigoracs-3/

For existing customers wishing to upgrade to the latest release, please contact us at support@draytek.com.au for download instructions.

If you wish to test the software, contact us at support@draytek.com.au for a 30-day trial of the software.

 

VigorConnect  V1.8.1

New Feature

1. Support VigorAP 906

Improvements

1. Fixed: Failure to get the software system name
   
2. Fixed: Failure to manage more than 2 Netflow routers
   
3. Fixed: No CPE response after performing the discovery job
   
4. Fixed: Web UI troubles while registering to VigorACS for the first time
   
5. Fixed: Failure to search VigorAP (as a Mesh Node) via Discover New Devices function
   
6. Fixed: Displaying the same VigorSwitch frequently on Configuration VLAN Setting>>Graphic View
   

Click here to download software.

 

To subscribe to our regular news updates, click on “Subscribe” on this page or login into your i-helpdesk account and enable the “Subscribe” option.