DrayTek Transitioning Phone Services to theNBN Part 1
In the previous video (DrayTek Products and Solutions For NBN) we looked at the NBN multi technology mix and the different routers needed for each type of NBN connection.
Usually the service provider will supply a low-end router as part of the bundle which usually does not do everything that is required.
While swapping the router out for a more advanced one is generally fairly straight forward, there is one issue where it can get a bit tricky, and that’s when we want to retain the same telephone service, now provided by the ISP.
In this video we discuss the basics of swapping out the ISP supplied router with a more advance DrayTek router while retaining the existing telephone service provided by the ISP.
Click here to watch the video.
WAN Connectivity
Configuring VigorLTE 200 Router for 4G LTE Connection
This guide shows how to configure the VigorLTE 200 router to enable 4G communication via the embedded 4G USB modem. You will need a Standard size SIM card from a service provider. In our example we will configure the LTE interface (WAN 1) as the primary connection so it will be always on and WAN 2 will be the backup connection
Click here to read the application note.
Configuring Vigor2620L Router for 4GLTE Connection
The guide will show you how to configure the Vigor2620L router to enable 4G communication via the embedded 4G USB modem. You will need a Standard size SIM card from a service provider. In our example we will configure the LTE interface (WAN 3) as the primary connection so it will be always on and WAN 1 will be the backup connection.
Click here to read the application note.
To subscribe to our regular news updates, click on “Subscribe” option at: http://eepurl.com/gwBeUj
For more information on i-Lan Technology Pty visit http://www.i-lan.com.au/support/terms-conditions or email support@i-lan.com.au if you have a specific question that
you would like addressed.