Weekly Update 6 January 2025
Latest Videos
This video describes the High Availability feature in DrayTek routers, also called hardware redundancy. It refers to the capability of automatically switching hardware, such as a standby router, when a primary router fails due to various reasons, such as loss of power or hardware failure.
Click here to watch this video.
This video demonstrates how to enable the WAN Aggregation feature available in DrayTek routers. WAN aggregation allows multiple WAN connections, whether DSL, Ethernet or even 4G/5G, to be aggregated. This feature increases internet speed by utilising session-based load balancing, which is supported in Dray Tek’s dual-WAN and multi-WAN routers.
Click here to watch this video.
Latest Knowledge Base Articles
Howto configure the Vigor 2136 using the new DrayOS 5 User interface
This article will help you to navigate the new DrayOS 5 interface of the Vigor2136 router. It includes links to various configuration options in the Vigor2136 and associated video clips.
Click here to read this article.
Vigor2136 Firewall Configuration Guide for Beginners
This article introduces how the firewall works in DrayTek DrayOS 5 routers, such as the Vigor2136. It includes a flow chart showing how the filter works on outgoing packets and a flow chart showing a DNS packet when Force DNS Redirection is enabled.
Click here to read this article.
Allow Internet access for certain LAN clients only
This article introduces how to set up Firewall Filter Rules to block most LAN clients from the Internet, and allow only some IP to pass. To do this, two firewall filter rules are required: one to block all the LAN clients from the Internet and another to pass some IP for Internet access. (TIPS: Also use Bind-IP-to-MAC feature to give DHCP client a static IP)
Click here to read this article.
Latest Firmware
Improvement
· - Fixed: Failure to set the filtering rule via Firefox (authentication error)
Click here to download the firmware.
Improvement
· - Fixed: Failure to set the filtering rule via Firefox (authentication error)
Click here to download the firmware.
Improvements
· - Improve web GUI security
· - Fixed: failure to set the filtering rule via Firefox (authentication error)
Click
here to download the firmware.
Improvements
· - Support displaying RSSI for Wi-Fi clients in the SysLog
· - Improve a probable memory insufficiency problem by reverting the Country object database to a previous version
· - Fixed: KMC248 buffer overwritten problem
· - Fixed: Random wireless disconnection problem
· - Fixed: Traffic could not pass through Multiple SA VPN to Cisco
· - Fixed: Failure to create Lets Encrypt
certificate with No-IP domain name
For a complete list of improvements, refer to the release notes in the download link.
Refer to the release notes for some known issues and their workaround.
Click
here to download the firmware.
Improvements
· - Support displaying RSSI for Wi-Fi clients in the SysLog
· - Improve a probable memory insufficiency problem by reverting the Country object database to a previous version
· - Fixed: KMC248 buffer overwritten problem
· - Fixed: Random wireless disconnection problem
· - Fixed: Traffic could not pass through Multiple SA VPN to Cisco
· - Fixed: Failure to create Lets Encrypt
certificate with No-IP domain name
For a complete list of improvements, refer to the release notes in the download link.
Refer to the release notes for some known issues and their workaround.
Click
here to download the firmware.
Improvements
· - Support displaying RSSI for Wi-Fi clients in the SysLog
· - Improve a probable memory insufficiency problem by reverting the Country object database to a previous version
· - Fixed: KMC248 buffer overwritten problem
· - Fixed: Random wireless disconnection problem
· - Fixed: Traffic could not pass through Multiple SA VPN to Cisco
· - Fixed: Failure to create Lets Encrypt certificate with No-IP domain name
For a complete list of improvements, refer to the release notes in the download link.
Refer to the release notes for some known issues and their workaround.
Click here to
download the firmware
Improvements
· - Improve web GUI security
· - Fixed: failure to set the filtering rule via Firefox (authentication error)
Click
here to download the firmware.
Improvement
· - Fixed: failure to set the filtering rule via Firefox (authentication error)
Click here to
download the firmware.
Vigor2865 / 2865 LTE / 2865L-5G V4.4.5.9
Improvements
· - Enhanced security by removing weak ciphers from the SSH server
· - Fixed: Failure to pass all traffic through VPN
· - Fixed: Both 2.4G and 5G Wi-Fi stopped working
· - Fixed: Failure to establish 3G/LTE WAN connection
· - Fixed: Changing the 2.4GHz channel from 11 to Auto caused the router to reboot
· - Fixed: Failure to establish LTE Connection (status "Initialization") after router reboot when PIN code on SIM Card was enabled
Click here to
download the firmware.
Improvements
· - Enhanced security by removing weak ciphers from the SSH server
· - Fixed: Failure to pass all traffic through VPN
· - Fixed: Both 2.4G and 5G Wi-Fi stopped working
· - Fixed: Failure to establish 3G/LTE WAN connection
· - Fixed: Changing the 2.4GHz channel from 11 to Auto caused the router to reboot
· - Fixed: Failure to establish LTE Connection
(status "Initialization") after router reboot when PIN code on SIM
Card was enabled
Click here to
download the firmware.
Improvement
· - Fixed: failure to set the filtering rule via Firefox (authentication error)
Click
here to download the firmware.
Vigor2927 / 2927 LTE / 2927L-5G V4.4.5.9
Improvements
· - Support displaying RSSI for Wi-Fi clients in the SysLog
· - Enhanced security by removing weak ciphers from the SSH server
· - Fixed: traffic could not pass through Multiple SA VPN to Cisco
· - Fixed: Changing the 2.4GHz channel from 11 to Auto caused the router to reboot
· - Fixed: Both 2.4G and 5G Wi-Fi stopped functioning when a specific wireless client (ax) connected
· - Fixed: TR-069 parameters were reset when the router was rebooted through the VigorACS server
· - Fixed: Failure to access the router's Web Interface after some days from the Internet via HTTP or HTTPS.
· - Fixed: Reboot issue occurred after upgrading to firmware version 4.4.5.8 due to increased memory usage from the New Country Object database
Click here to download the firmware.
Improvements
· - Improve the Web GUI Security
· - Add handling for raw data without a "Year" field
· - Remove unused WAN interfaces from NAT WUI
· - Add the IP Filter name in Syslog for improved logging
· - Enhance the dashboard to display Link Aggregation status
· - Ensure the client data quotas persist after the
router reboot
For a complete list of improvements, refer to the release notes in the download link.
Click here to
download the firmware.
Improvements
· - Improve the Web GUI Security
· - Add handling for raw data without a "Year" field
· - Remove unused WAN interfaces from NAT WUI
· - Add the IP Filter name in Syslog for improved logging
· - Enhance the dashboard to display Link Aggregation status
· - Ensure the client data quotas persist after the router reboot
For a complete list of improvements, refer to the release notes in the download link.
Click
here to download the firmware.
New Features
· - Support to enable/disable Port 1 to Port 12 by CLI
· - Add a new option of Enable TLS 1.3 on System Maintenance >> Management
· - Display SSD/eMMC usage and health information on Linux Applications >> Storage
· - Add new tab of Custom Rules and Rule Exclusion List options on Linux Applications >>Suricata
· - Support TOTP for remote web management on System Maintenance >> Administrator Password
Improvements
· - Improve the Web GUI Security
· - Update the GeoIP database to 2024-10-01
· - Enhanced Diagnostics >> Debug log function
· - Add support for responding to ARP Probe packets
· - Adjust the sort arrows on Firewall >> Defense Setup
· - Update log wording to "SMS/Email alert suppressed"
For a complete list of improvements, refer to the release notes in the download link.
Click here to download the firmware.
DrayTekRouter (Android) V1.3.4
Improvements
· Add a new function to delete a CPE on APP
· Add a TR-069 page to add managed CPE to VigorACS
· Support router management for Vigor2136 series, Vigor2927L-5G and Vigor2865L-5G
Click here to download the App.
Calendar Events from DrayTek HQ
DrayTek HQ often sends notifications of system updates or outages, security notifications, and firmware releases.
Click here for the latest news from DrayTek HQ
To subscribe to our regular news updates, click “Subscribe”
on this page or log into your i-helpdesk account and enable the “Subscribe”
option.
Related Articles
Weekly Update 2 January 2024
Latest Firmware Vigor2865 /2865 LTE V4.4.3.2 New Feature · - Support AP management for VigorAP 1062C Improvements · - Improve the LTE connection · - Improve Web GUI Security (CVE-2023-47254) · - Support to display IPsec phase 2 network ID on the CPE ...Weekly Update 6 January 2020
Latest Application Notes Switch How to add VigorSwitch into the VigorConnect server and set up VLANs VigorConnect version 1.2.0 can now manage VigorSwitches on the local LAN. It allows you to check the VigorSwitch dashboard, monitor CPE Actions, ...Weekly Update 30 January 2020
Latest Videos DrayTek VigorSwitch G2280x/P2280x 10Gb Layer 2+ Managed Switches This video introduces the VigorSwitch G2280x/P2280x 10Gb Layer 2+ Managed Switches. These switches have 10Gb capability and includes 24 Gigabit Ethernet ports plus 4 x ...Weekly Update 7 January 2022
Latest Firmware Vigor2952 V3.9.7 Improvements · - Username and password for both LAN-to-LAN and Remote Dial-In VPN increased to 26 characters. · - Fixed: Detection of VigorAP with tagged management VLAN. · ...Weekly Update 7 January 2021
Latest Application Notes WAN PPPoE Overview and Troubleshooting ways When PPPoE authentication issues are encountered it helps to understand the processes involved to troubleshoot and find out what is causing the issue. This article describes the 6 ...